For example, assignment of a primary token can be performed only when a process has zero or one threads. An attempt was made to operate on a thread within a specific process, but the thread specified is not in the process specified. The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role. On applicable Windows Server releases, the Security Accounts Manager SAM database is significantly out of synchronization with the copy on the domain controller.
A complete synchronization is required. This error should never be returned to an application, it is a place holder for the Windows LAN Manager Redirector to use in its internal error mapping routines. Click OK to terminate the application. The hash for the image cannot be found in the system catalogs. The image is likely corrupt or the victim of tampering. An illegal character was encountered. For a multibyte character set, this includes a lead byte without a succeeding trail byte.
The system bios failed to connect a system interrupt to the device or bus for which the device is connected. A volume has been accessed for which a file system driver is required that has not yet been loaded. It is corrupt, absent, or not writable. Choosing OK will terminate the process, and choosing Cancel will ignore the error. The system has been shut down. The data has been lost. This error might be caused by a failure of your computer hardware or network connection.
Try to save this file elsewhere. Too much data might have been put in the shared memory window. Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream. The attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle used for the operation.
The stack pointer has been left in an inconsistent state. Select NO to continue execution. Selecting NO can cause the application to operate incorrectly. Selecting OK will cause the service to continue operation. However, the service process might operate incorrectly. Additional storage requests will be ignored. The password provided is too short to meet the policy of your user account. Choose a longer password. The policy of your user account does not allow you to change passwords too frequently.
This is done to prevent users from changing back to a familiar, but potentially discovered, password. If you feel your password has been compromised, contact your administrator immediately to have a new one assigned. You have attempted to change your password to one that you have used in the past.
The policy of your user account does not allow this. Select a password that you have not previously used. This system will shut down in 1 hour. To restore access to this installation of Windows, upgrade this installation using a licensed distribution of this product. The application will not run properly. Updating this driver might allow the system to go to standby mode. Windows is increasing the size of your virtual memory paging file.
During this process, memory requests for some applications might be denied. For more information, see Help. The file has been replaced with the signed file. An attempt to remove a process DebugPort was made, but a port was not already associated with the process. This version of Windows is not compatible with the behavior version of directory forest, domain, or domain controller. The device encountered an error while applying power or reading the device configuration. This might be caused by a failure of your hardware or by a poor connection.
The create operation failed because the name contained at least one mount point that resolves to a volume to which the specified device object is not attached. The device object parameter is either not a valid device object or is not attached to the volume specified by the file name.
Hibernation will be disabled until the system is restarted. This device will not be used. Contact your system vendor for system BIOS update. This warning level status indicates that the transaction state already exists for the registry subtree, but that a transaction commit was previously aborted. The commit has NOT been completed, but it has not been rolled back either so it can still be committed if desired. A substitute prefix was used, which will not compromise system security.
However, this might provide more restrictive access than intended. Some data might have been lost. This might be insecure. This is secure, but might be incompatible with previous releases of the operating system. The thread was resumed and termination proceeded. Local fixes must be performed on this image. This informational level status indicates that a specified registry subtree transaction state did not yet exist and had to be created. An exception is raised so a debugger can load, unload, or track symbols and breakpoints within these bit segments.
This was done because the file system encountered a failure on a member of the fault-tolerant volume, but it was unable to reassign the failing area of the device. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but it was not able to reassign the failing area of the device. The remaining data will be sent later. The CPUs in this multiprocessor system are not all the same revision level.
To use all processors the operating system restricts itself to the features of the least capable processor in the system. If problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported. The system has automatically enabled a tracking code to try and catch the culprit.
A reparse should be performed by the object manager because the name of the file resulted in a symbolic link. This success level status indicates that the transaction state already exists for the registry subtree, but that a transaction commit was previously aborted.
The commit has now been completed. This indicates that a notify change request has been completed due to closing the handle which made the notify change request. The computer was able to connect on a secondary transport. The translator has translated these resources into the global space and no further translations should be performed.
The data provider requires that previously fetched data is released before asking for more data. The client of a component requested an operation that is not valid given the state of the component instance.
The Desktop heap encountered an error while allocating session memory. There is more information in the system event log.
This error can be caused by network connectivity issues. This error was returned by the server on which the file exists. This error can be caused if the device has been removed or the media is write-protected. The volume does not contain a recognized file system. Be sure that all required file system drivers are loaded and that the volume is not corrupted. One of the files in the registry database had to be recovered by use of a log or alternate copy.
The recovery was successful. The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.
The registry could not read in, write out, or flush one of the files that contain the system's image of the registry. The system attempted to load or restore a file into the registry, but the specified file is not in a registry file format.
A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes. The account name is invalid or does not exist, or the password is invalid for the account name specified. The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
The account specified for this service is different from the account specified for other services running in the same process. This service runs in the same process as the service control manager.
Therefore, the service control manager cannot take action if this service's process terminates unexpectedly.
The executable program that this service is configured to run in does not implement the service. Unable to open a device that was sharing an IRQ with other devices. At least one other device that uses that IRQ was already opened. The current process has used all of its system allowance of handles for Windows manager objects. Unable to move the replacement file to the file to be replaced.
The file to be replaced has retained its original name. The file to be replaced has been renamed using the backup name. The system shutdown cannot be initiated because there are other users logged on to the computer.
The network path was either typed incorrectly, does not exist, or the network provider is not currently available. Try retyping the path or contact your network administrator. Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed.
Disconnect all previous connections to the server or shared resource and try again. An attempt was made to establish a session to a network server, but there are already too many sessions established to that server. The network location cannot be reached. For information about network troubleshooting, see Windows Help.
A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached. The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist. An attempt was made to perform an initialization operation when initialization has already been completed. This operation is not supported on a computer running Windows Server operating system for Small Business Server.
The remote system is not available. This program is blocked by Group Policy. For more information, contact your system administrator. A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific.
The Kerberos protocol encountered an error while validating the KDC certificate during smartcard logon. The Kerberos protocol encountered an error while attempting to utilize the smartcard subsystem. The system detected a possible attempt to compromise security. Ensure that you can contact the server that authenticated you. The Group Policy framework should call the extension in the synchronous foreground policy refresh.
Windows cannot open this program because the license enforcement system has been tampered with or become corrupted. The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application. An attempt to perform an operation on a debug object failed because the object is in the process of being deleted.
You do not have permissions to execute bit applications. Check your permissions with your system administrator. The service start failed because one or more services in the same process have an incompatible service SID type setting. A service with a restricted service SID type can only coexist in the same process with other services with a restricted SID type. The service notification client is lagging too far behind the current state of services in the machine.
A privilege that the service requires to function properly does not exist in the service account configuration. The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a null string. An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member. Unable to update the password. The value provided for the new password contains values that are not allowed in passwords. The value provided for the new password does not meet the length, complexity, or history requirements of the domain. Logon failure: User account restriction.
Possible reasons are blank passwords not allowed, logon hour restrictions, or a policy restriction has been enforced. The specified attributes are invalid, or incompatible with the attributes for the group as a whole.
Either a required impersonation level was not provided, or the provided impersonation level is invalid. Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied. Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.
Generic access types were contained in an access mask that should already be mapped to nongeneric types. The requested action is restricted for use by logon processes only.
The calling process has not registered as a logon process. The user cannot be removed from a group because the group is currently the user's primary group. A member could not be added to or removed from the local group because the member does not exist. A new member could not be added to a local group because the member has the wrong account type.
The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because the service has accepted the maximum number of connections. The Windows Installer service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. The installation source for this product is not available.
Verify that the source exists and that you can access it. This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service. Another installation is already in progress. Complete that installation before proceeding with this install. This installation package could not be opened.
Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. Contact the application vendor to verify that this is a valid Windows Installer package.
There was an error starting the Windows Installer service user interface. Contact your support personnel. Error opening installation log file. Verify that the specified log file location exists and that you can write to it. The Temp folder is on a drive that is full or is inaccessible. Free up space on the drive or verify that you have write permission on the Temp folder.
This installation package is not supported by this processor type. Contact your product vendor. This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package. Couple things I've found: TS is the tech support number at the autodesk support site listed above re: arx and appload, I'd just check it out and make sure it doesn't apply to you.
Another is if you have anything else installed on that machine like ADT or 3D Studio Viz, or maybe within map civil and land, make sure you've installed them in the correct order, you should be able to find that somewhere in the knowlege base. Also, you've probably already tried this If none of this works, you're pretty good for calling your support and having a list of things you've tried. If your CO.
Please post back as I am interested to find out the results! Best of luck! Would you please expound? Just a start!!!! The exception at number is identical no mattter what drawing I receive the fatal error.
Reopened drawing did a Aduit then purge all, saved drawing and so far no Fatal error. I will keep hammer it and let you all know. Question Has anyone have any luck trying to get reply's back from Autodesk? I have sent them a few e-mail with no reply's. Red Flag This Post Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.
The Tek-Tips staff will check this out and take appropriate action. Because the associated transaction manager or resource manager has been closed, the handle is no longer valid. The specified operation could not be performed on this superior enlistment because the enlistment was not created with the corresponding completion response in the NotificationMask. The specified operation could not be performed because the record to be logged was too long. This can occur because either there are too many enlistments on this transaction or the combined RecoveryInformation being logged on behalf of those enlistments is too long.
The kernel transaction manager had to abort or forget the transaction because it blocked forward progress. The handle is no longer properly associated with its transaction.
It might have been opened in a transactional resource manager that was subsequently forced to restart. Please close the handle and open a new one. The specified operation could not be performed because the resource manager is not enlisted in the transaction. The log service encountered an attempt to read from a marshaling area with an invalid read context. The number of reserved log records or the adjustment of the number of reserved log records is invalid.
Records were appended to the log or reservation changes were made, but the log could not be flushed. The log is pinned due to reservation consuming most of the log space. Free some reserved records to make space available. The next time you reboot the computer, a dialog box will allow you to upload data about this failure to Microsoft. Minifilters should never return this value.
Posting this operation to a worker thread for further processing is not safe at this time because it could lead to a system deadlock. The Filter Manager was not initialized when a filter tried to register. Make sure that the Filter Manager is loaded as a driver.
The filter is not ready for attachment to volumes because it has not finished initializing FltStartFiltering has not been called. The filter must clean up any operation-specific context at this time because it is being removed from the system before the operation is completed by the lower drivers.
The Filter Manager had an internal error from which it cannot recover; therefore, the operation has failed.
This is usually the result of a filter returning an invalid value from a pre-operation callback. The object specified for this action is in the process of being deleted; therefore, the action requested cannot be completed at this time. The name requested was not found in the Filter Manager name cache and could not be retrieved from the file system.
The provided monitor descriptor block is either corrupted or does not contain the monitor's detailed serial number. The provided monitor descriptor block is either corrupted or does not contain the monitor's user-friendly name. An object being referenced has already reached the maximum reference count and cannot be referenced further. The specified VidPN topology is valid but is not supported by this model of the display adapter. The specified VidPN topology is valid but is not currently supported by the display adapter due to allocation of its resources.
The specified VidPN modality is not supported for example, at least two of the pinned modes are not co-functional. The miniport does not have a recommendation regarding the request to provide a functional VidPN given the current display adapter configuration. The system failed to determine a mode that is supported by both the display adapter and the monitor connected to it. The number of video present targets must be greater than or equal to the number of video present sources.
Two or more of the specified resources are not related to each other, as defined by the interface semantics. The specified content geometry transformation is not supported on the respective VidPN present path. Only one unassigned mode set can exist at any one time for a particular VidPN source or target. The specified primary surface has a different private-format attribute than the current primary surface. The miniport requested that augmentation be canceled for the specified source of the specified VidPN's topology.
The client VidPN is not set on this adapter for example, no user mode-initiated mode changes have taken place on this adapter. An attempt was made to start a lead link display adapter when the chain links had not yet started.
An attempt was made to turn on a lead link display adapter when the chain links were turned off. The adapter link was found in an inconsistent state. An array passed to a function cannot hold all of the data that the function wants to put in it. This function failed because the GDI display device passed to it was not attached to the Windows desktop.
The PVP does not support mirroring display devices because they do not have any protected outputs. The function failed because an invalid pointer parameter was passed to it. A pointer parameter is invalid if it is null, is not correctly aligned, or it points to an invalid address or a kernel mode address. This function failed because the GDI device passed to it did not have any monitors associated with it.
A certificate could not be returned because the certificate buffer passed to the function was too small.
DxgkDdiOpmCreateProtectedOutput could not create a protected output because the video present yarget is in spanning mode. DxgkDdiOpmCreateProtectedOutput could not create a protected output because the video present target is in theater mode.
The function call failed because the display adapter's hardware functionality scan HFS failed to validate the graphics hardware. DxgkDdiOPMConfigureProtectedOutput cannot enable the specified output protection technology because the output's screen resolution is too high. The operating system asynchronously destroyed this OPM-protected output because the operating system state changed.
This error typically occurs because the monitor PDO associated with this protected output was removed or stopped, the protected output's session became a nonconsole session, or the protected output's desktop became inactive. OPM functions cannot be called when a session is changing its type. This error is returned only if a protected output has OPM semantics. This error is returned only if a protected output has COPP semantics.
This error implies that the data was corrupted while it was being transmitted from a monitor to a computer. The operating system asynchronously destroyed the monitor that corresponds to this handle because the operating system's state changed.
This error typically occurs because the monitor PDO associated with this handle was removed or stopped, or a display mode change occurred. This function can be used only if a program is running in the local console session.
It cannot be used if a program is running on a remote desktop session or on a terminal server session. The function failed because the specified GDI display device was not attached to the Windows desktop. This function does not support GDI mirroring display devices because GDI mirroring display devices do not have any physical monitors associated with them.
A pointer parameter is invalid if it is null, is not correctly aligned, or points to an invalid address or to a kernel mode address. This function failed because the GDI device passed to it did not have a monitor associated with it. An array passed to the function cannot hold all of the data that the function must copy into the array. The function failed because the current session is changing its type.
This function cannot be called when the current session is changing its type. The BitLocker encryption key could not be obtained from the startup key or the recovery password. The system boot information changed or the TPM locked out access to BitLocker encryption keys until the computer is restarted. Boot debugging is enabled. Bitlocker Drive Encryption failed to recover from aborted conversion. This could be due to either all conversion logs being corrupted or the media being write-protected.
An attempt to allocate a hardware resource failed because the resource is used by another component. The current state of the specified port on this network interface does not support the requested operation. The wireless LAN interface is in auto-configuration mode and does not support the requested parameter change operation. IPsec Dos Protection failed to create state because there are already maximum number of entries allowed by policy. IPsec Dos Protection received an IPsec negotiation packet for a keying module which is not allowed by policy.
IPsec Dos Protection failed to create per internal IP ratelimit queue because there is already maximum number of queues allowed by policy. The chain of virtual hard disks is inaccessible. The process has not been granted access rights to the parent virtual hard disk for the differencing disk. The chain of virtual hard disks is corrupted. There is a mismatch in the virtual sizes of the parent virtual hard disk and differencing disk. A differencing disk is indicated in its own parent chain.
There was an error opening a virtual hard disk further up the chain. Skip to main content. This browser is no longer supported. Download Microsoft Edge More info. Contents Exit focus mode. Please rate your experience Yes No. Any additional feedback? In this article. Returned by enumeration APIs to indicate more information is available to successive calls.
A file system or file system filter driver has successfully completed an FsFilter operation. This is unexpected, indicating that the callback missed restoring the priority. The ALPC message being canceled has already been retrieved from the queue on the other side. The receive operation was successful. Check the ALPC completion list for the received message. The specified content transformation is not pinned on the specified VidPN present path. The display adapter is being polled for children too frequently at the same polling level.
A transaction scope could not be entered because the scope handler has not been initialized. An attempt was made to attach to a device that was already attached to another device. An attempt was made to query image information on a section that does not map an image. A non-close operation has been requested of a file object that has a delete pending. Indicates a particular security ID cannot be assigned as the primary group of an object.
No more authority agent values are available for the particular identifier authority value. An attempt was made to open an anonymous-level token. Anonymous tokens cannot be opened.
Space to store the file that is waiting to be printed is not available on the server. The number of active profiling objects is at the maximum and no more can be started.
An attempt was made to exceed the limit on the number of domains per server for this release. Indicates a security descriptor is not in the necessary format absolute or self-relative. An attempt was made to access a network file, but the network software was not yet started. An attempt was made to start the redirector, but the redirector has already been started.
Run the Chkdsk utility. The logon session is not in a state that is consistent with the requested operation. RtlFindMessage could not locate the requested message ID in the message table resource. An attempt was made to duplicate an object handle into or out of an exiting process.
Indicates that the user supplied an invalid descriptor when trying to set up LDT descriptors. The specified image file did not have the correct format. It appears to be NE format. An attempt was made to map a file of size zero with the maximum size specified as zero.
Indicates a name that was specified as a remote computer name is syntactically invalid. The specified image file did not have the correct format: it appears to be LE format. The specified image file did not have the correct format: it did not have an initial MZ. When accessing a new tape of a multi-volume partition, the current blocksize is incorrect.
An illegal operation was attempted on a registry key that has been marked for deletion. The workstation does not have a trust secret for the primary domain in the local LSA database. The network logon failed. This might be because the validation authority cannot be reached.
An attempt was made to acquire a mutant such that its maximum count would have been exceeded. Short name settings cannot be changed on this volume due to the global registry setting. The transport rejected the specified network address due to invalid use of a wildcard.
The transport address could not be opened because all the available addresses are in use. The transport can only process the specified request on the server side of a session. The transport can only process the specified request on the client side of a session. The attempt to insert the ID in the index failed because the ID is already in the index. No service is operating at the destination port of the transport on the remote system. The requested operation cannot be performed on a file with a user mapped section open.
You have attempted to load a legacy device driver while its device instance had been disabled. The NTFS symbolic link could not be resolved even though the initial file name is valid. The specified file is encrypted and the user does not have the ability to decrypt it. The reparse attribute cannot be set because it is incompatible with an existing attribute.
Mutual Authentication failed. The server password is out of date at the domain controller. Cannot change to a security-disabled group because primary members are in this group. The crypto system or checksum function is invalid because a required function is unavailable.
The Kerberos protocol encountered an error while attempting to use the smart card subsystem. A machine check error has occurred. Check the system event log for additional information.
The driver could not be loaded because a previous version of the driver is still in memory. Answered by:. Archived Forums. Windows Server General Forum. Sign in to vote. Hi, Does anybody has any solution for this error. Thanks in advance for any help! Monday, October 10, AM.
0コメント